CCNA Study Planner

A week-by-week study plan for the 200-301 exam: 2-week, 4-week, and 8-week schedules.

By Abu Anns · Last updated 20 November 2026Exam version: 200-301 v1.1 (current until 2 Feb 2027)

How to use this planner

Three plans follow: 2 weeks (for experienced candidates refreshing for the exam), 4 weeks (for candidates with some networking background), and 8 weeks (for beginners starting from scratch). Pick the plan that matches your starting point honestly — the 2-week plan assumes you can already subnet and have configured Cisco devices before. Every plan mixes reading, lab practice, and questions, because the exam tests all three: reading alone will not prepare you for the simulation questions, and labs alone will not cover the conceptual topics. Cisco Packet Tracer is the lab tool for all three plans: it is free for Networking Academy students, it covers every configuration topic in the blueprint, and a basic lab (two routers, two switches, a few PCs) takes minutes to build. Cisco Modeling Labs (CML) has a free tier if you want real IOS images.

The 2-week plan (experienced candidates)

Days 1-3: Foundations sprint. Work through the network fundamentals, switching, TCP/UDP, subnetting, and IPv6 guides, answering every question. Drill subnetting for 15 minutes at the start of each session — speed matters as much as accuracy. Lab: build a two-router, two-switch topology in Packet Tracer and configure IPv4 and IPv6 addressing, verifying with show commands.

Days 4-7: Switching and routing. Cover the VLANs, EtherChannel/STP, wireless, routing fundamentals, and OSPF guides. Lab: configure VLANs, trunks, and interVLAN routing on a Layer 3 switch; build a redundant topology and verify spanning tree with show spanning-tree; configure single-area OSPF on three routers and verify adjacencies and the routing table.

Days 8-10: Services, security, automation. Cover the IP services, security, Layer 2 security, and automation guides. Lab: configure NAT overload, DHCP relay, SSH, standard and extended ACLs, port security, and DHCP snooping on your topology.

Days 11-14: Test and fix. Take the 50-question timed mock test, then spend two days on your weakest domains using the readiness breakdown. Re-take the mock, review every wrong answer, and spend the final day on the cheat sheet: subnetting tables, port numbers, administrative distances, and OSPF timer values.

The 4-week plan (some networking background)

Week 1: Fundamentals. Study the network fundamentals, switching, and TCP/UDP guides (two guides every two days). Start a daily 10-minute subnetting drill and keep it going for the whole four weeks. Lab: build your Packet Tracer topology and practise basic device configuration, interface checks, and show commands.

Week 2: Addressing and switching. Study the subnetting, IPv6, VLANs, and EtherChannel/STP guides. Lab: subnet a network with VLSM for three departments; configure VLANs, trunks, and EtherChannel; verify spanning tree behaviour by disconnecting a link and watching the blocked port take over.

Week 3: Routing and services. Study the wireless, routing fundamentals, OSPF, and IP services guides. Lab: configure static routes (including a floating static route), single-area OSPF with DR/BDR election, NAT, DHCP, and NTP. Practise reading routing tables until you can explain every field of an entry.

Week 4: Security, automation, and testing. Study the security, Layer 2 security, and automation guides. Lab: configure ACLs, port security, DHCP snooping, and SSH. Take the timed mock test mid-week, spend two days on weak domains, re-take the mock, and finish with the cheat sheet.

The 8-week plan (beginners)

Weeks 1-2: Foundations. Study the network fundamentals, switching, and TCP/UDP guides slowly — one guide every two days, with the questions after each. Start Packet Tracer in week 1: get comfortable with the interface, build a small network, and practise show commands. Begin the daily subnetting drill in week 2.

Weeks 3-4: Addressing and switching. Study the subnetting, IPv6, VLANs, and EtherChannel/STP guides. Subnetting deserves a full week of drilling: work through every worked example in the guide by hand before checking the answers. Lab: build VLANs and trunks, configure interVLAN routing, and observe spanning tree in a redundant topology.

Weeks 5-6: Routing and services. Study the wireless, routing fundamentals, OSPF, and IP services guides. Lab: build a three-router OSPF network, configure static routes and a floating static route, add NAT and DHCP, and verify everything with show ip route and show ip ospf neighbor. Spend time reading routing table output until the AD/metric format is second nature.

Week 7: Security and automation. Study the security, Layer 2 security, and automation guides. Lab: configure ACLs (standard and extended), port security with sticky MAC addresses, DHCP snooping, and SSH access. Review the wireless security protocols and the REST API/JSON concepts.

Week 8: Test and consolidate. Take the timed mock test on day 1 and use the domain breakdown to plan the week: two days on your two weakest domains, re-reading the guides and re-doing their questions. Take the mock again on day 5. Days 6-7 are for the cheat sheet and light review only — no new material in the last 48 hours. Book the exam for the end of week 8 so the plan has a real deadline.

Exam-day tips

The night before the exam, review the cheat sheet once and then stop — cramming new material the night before costs more in confidence than it gains in knowledge. Get a full night's sleep; the exam rewards clear thinking more than last-minute facts. On the day, arrive at the test centre (or log into the online proctoring session) at least 30 minutes early, with your identification ready. Read each question twice before answering, because several questions turn on a single word such as "not", "first", or "least". The exam is forward-only, so commit to each answer and move on — do not burn ten minutes on one hard question when three easier ones are waiting. Simulation questions deserve extra care: read the task, check the current state with show commands before changing anything, and verify your change afterwards. If you finish with time left over, you cannot go back, so pace yourself evenly from the start rather than rushing the first half.

Lab checklist (all plans)

Before your exam date, you should have configured each of these at least once in Packet Tracer: IPv4 and IPv6 addressing on routers and SVIs; VLANs, access ports, and trunk ports; router-on-a-stick and Layer 3 switch interVLAN routing; EtherChannel with LACP; spanning tree verification and PortFast/BPDU guard; static routes (default, network, host, floating); single-area OSPF with neighbour verification; NAT overload; DHCP relay; SSH access; standard and extended ACLs; port security; and DHCP snooping. If you can build a topology combining all of these from memory and verify it with show commands, you are ready for the simulation questions.

Advertisement