Network Services, Hardware & SOHO Setup
A+ Core 1 220-1201 · Networking
This guide covers the rest of the networking domain: the services networked hosts provide, common network configuration concepts, networking hardware, small office/home office (SOHO) setup, internet connection types, and the physical tools of the trade. Where the previous guide was about protocols and radio waves, this one is about the boxes, services, and settings that make a working network.
Services provided by networked hosts
A network is more than cables and switches — it is the services running on the hosts connected to it. DNS servers translate names to IP addresses; DHCP servers hand out IP addresses automatically; file servers (file shares) store documents centrally; print servers share printers; mail servers send and receive email; syslog servers collect log messages from devices; web servers host websites; AAA servers handle authentication, authorization, and accounting for network access; database servers store structured data; and NTP servers keep clocks synchronized across the network — important because authentication systems such as Kerberos fail if clocks drift too far apart.
Internet appliances sit at the edge of the network and provide specialized functions. A spam gateway filters incoming email before it reaches the mail server. A unified threat management (UTM) device combines firewall, antivirus, intrusion prevention, and content filtering in one box. A load balancer spreads incoming traffic across multiple servers so no single server is overwhelmed. A proxy server sits between users and the internet, forwarding requests on their behalf — it can cache content, filter websites, and hide internal addresses. Two more categories appear in the objectives: IoT (Internet of Things) devices such as smart thermostats, cameras, and sensors that connect to the network, and legacy/embedded systems such as SCADA (supervisory control and data acquisition) systems that control industrial equipment — these are often old, unpatched, and hard to secure, which is why the exam mentions them.
Network configuration concepts
A VLAN (virtual LAN) is a logical grouping of devices on a switch: devices in the same VLAN behave as if they were on the same physical network even if they are plugged into different switches, and devices in different VLANs cannot talk to each other without a router. VLANs segment traffic for security and performance — for example, putting guest Wi-Fi users in a separate VLAN from company servers. A VPN (virtual private network) creates an encrypted tunnel over an untrusted network such as the internet, letting a remote worker access the office network as if they were on site.
DNS records are the entries that make name resolution work. An A record maps a hostname to an IPv4 address; an AAAA record maps to an IPv6 address; a CNAME record is an alias pointing one name to another; an MX record identifies the mail server for a domain; and a TXT record holds arbitrary text, most commonly used for email authentication: SPF (Sender Policy Framework) lists which servers may send mail for a domain, DKIM (DomainKeys Identified Mail) adds a cryptographic signature to outgoing mail, and DMARC (Domain-based Message Authentication, Reporting, and Conformance) tells receiving servers what to do with mail that fails SPF or DKIM checks. Together they fight email spoofing and phishing.
DHCP concepts are straightforward but heavily tested. A DHCP scope is the range of addresses the server can hand out. A lease is the temporary assignment of an address to a client, with a duration after which the client must renew. A reservation ties a specific address to a specific MAC address so a device (such as a printer) always gets the same address. An exclusion removes addresses from the pool so they can be assigned statically — for example, excluding the addresses used by servers and the gateway.
Networking hardware
Routers connect different networks and forward packets between them based on IP addresses. Switches forward frames within a network based on MAC addresses; a managed switch can be configured (VLANs, port settings, monitoring), while an unmanaged switch is plug-and-play with no configuration. Access points provide wireless connectivity. A patch panel is the termination point for the network cables running through a building's walls — each wall outlet connects to a port on the panel, and short patch cables connect the panel to the switch. A firewall inspects and filters traffic between networks. PoE (Power over Ethernet) delivers electrical power over the same Ethernet cable that carries data, powering access points, IP phones, and cameras; it can come from a PoE switch or a separate injector that adds power to a single link. The original PoE standard (802.3af) delivers up to 15.4 watts per port, PoE+ (802.3at) up to 30 watts, and PoE++ (802.3bt) up to 60 or 100 watts.
Internet-facing hardware includes the cable modem (for cable internet), DSL modem (for phone-line internet), and ONT (optical network terminal) (for fiber internet — it converts the optical signal to Ethernet). The NIC (network interface card) is the hardware that connects a device to the network; every NIC has a unique MAC address, a 48-bit hardware address burned in at the factory and used for Layer 2 forwarding.
SOHO networks, connection types, and tools
Configuring a SOHO network means setting up IP addressing. IPv4 addresses are 32-bit (four numbers, e.g. 192.168.1.10); private addresses (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16) are used inside local networks and are not routable on the internet, while public addresses are globally unique and assigned by an ISP. IPv6 addresses are 128-bit and written in hexadecimal, providing far more addresses. APIPA (Automatic Private IP Addressing) is what a Windows host does when it cannot reach a DHCP server: it assigns itself an address in the 169.254.0.0/16 range. An APIPA address on a client is a strong clue that DHCP is failing. Addresses can be static (manually configured, used for servers, printers, and gateways) or dynamic (assigned by DHCP). Every host also needs a subnet mask (which defines the network portion of the address) and a gateway (the router it sends traffic to when the destination is on another network).
Internet connection types each have a profile. Fiber is the fastest and most reliable, using light over glass. Cable uses the coaxial TV network and offers high speeds, though bandwidth is shared with neighbours. DSL uses existing telephone lines; it is widely available but slower, and speed drops with distance from the exchange. Satellite works anywhere with a view of the sky but has high latency (the signal travels to orbit and back), making it poor for real-time applications. Cellular uses the mobile network and is useful where wired options do not exist. A WISP (wireless internet service provider) delivers internet over fixed wireless links, common in rural areas. Network types describe scope: LAN (local area network, a building or campus), WAN (wide area network, spanning cities or countries), PAN (personal area network, a person's devices), MAN (metropolitan area network, a city), SAN (storage area network, connecting servers to storage), and WLAN (wireless LAN).
Finally, the physical tools. A crimper attaches RJ45 connectors to Ethernet cable. A cable stripper removes the outer jacket without nicking the wires. A punchdown tool pushes wires into a patch panel or keystone jack. A cable tester verifies continuity and correct wiring of a run. A toner probe (tone generator and probe) traces a cable through walls and ceilings by sound. A Wi-Fi analyzer surveys wireless signal strength and channel usage. A loopback plug tests a network port by sending its own output back as input. A network tap copies traffic for monitoring without interrupting the link.
Exam traps to watch for
- Seeing a 169.254.x.x address and treating it as normal: it is APIPA, which means the host could not reach a DHCP server.
- Confusing a DHCP reservation (a specific address always given to one MAC address) with an exclusion (addresses removed from the pool for static use).
- Mixing up DNS record types: A is IPv4, AAAA is IPv6, MX is mail, CNAME is an alias, TXT carries SPF/DKIM/DMARC text.
- Saying a switch routes between networks: switches forward frames within a network by MAC address; routers forward packets between networks by IP address.
Practice questions
Test yourself on this guide. Answers are checked instantly, with a full explanation for each question.
Q1.A user's computer has the IP address 169.254.14.88 and cannot reach the internet. Other computers on the same network work fine. What is the most likely cause?
Explanation: An address in the 169.254.0.0/16 range is an APIPA address, which Windows assigns automatically when no DHCP server responds. Since other computers work, the DHCP server is up — the problem is this host's path to it (cable, switch port, or DHCP client service). Option B is wrong because a DNS problem would not change the IP address. Option A is wrong because a wrong gateway would still leave a normal DHCP-assigned address. Option D is wrong because a VLAN problem would typically prevent an address from being assigned at all or give a different subnet, and APIPA specifically indicates DHCP failure.
Exam objective: 220-1201 Objective 2.6: Given a scenario, configure basic wired/wireless small office/home office (SOHO) networks
Q2.A small office wants its network printer to always receive the same IP address, while all other devices get addresses automatically. What should the technician configure on the DHCP server?
Explanation: A DHCP reservation maps a specific MAC address to a specific IP address, so the printer always receives the same address while still using DHCP. Option A is wrong because an exclusion removes an address from the pool — the printer would then need a static address configured manually. Option C is wrong because lease time affects how often addresses are renewed, not which address a device gets. Option B is wrong because a larger scope only adds more addresses to the pool.
Exam objective: 220-1201 Objective 2.4: Explain common network configuration concepts
Q3.An administrator wants to separate guest Wi-Fi traffic from the company's internal servers so guests cannot reach the servers. Which technology provides this separation?
Explanation: A VLAN creates a logical network segment: devices in different VLANs cannot communicate without a router, so guest devices in one VLAN are isolated from servers in another. Option D is wrong because a VPN creates an encrypted tunnel for remote access; it does not segment a local network. Option A is wrong because a proxy forwards and filters web requests; it does not isolate network segments. Option B is wrong because a load balancer distributes traffic among servers; it provides no isolation.
Exam objective: 220-1201 Objective 2.4: Explain common network configuration concepts
Q4.A company is receiving phishing emails that appear to come from its own domain. Which DNS-based mechanism tells receiving mail servers to reject mail that fails authentication checks?
Explanation: DMARC is the policy layer: it tells receiving servers what to do (none, quarantine, or reject) with mail that fails SPF or DKIM authentication, which is how spoofed mail from the company's own domain gets blocked. Option D is wrong because an A record only maps a name to an IPv4 address. Option C is wrong because a CNAME is just an alias for another name. Option B is wrong because DHCP reservations are about IP addressing, not email authentication.
Exam objective: 220-1201 Objective 2.4: Explain common network configuration concepts
Q5.A technician needs to install a wireless access point on a ceiling where there is no power outlet nearby. The switch in the wiring closet supports PoE. What is the best solution?
Explanation: PoE delivers power over the Ethernet cable, so the access point needs only its network cable — no nearby power outlet is required. Option D is wrong because running new electrical wiring is expensive and unnecessary when PoE is available. Option B is wrong because a USB adapter still needs a power outlet nearby. Option C is wrong because a wireless mesh link does not solve the power problem at all.
Exam objective: 220-1201 Objective 2.5: Compare and contrast common networking hardware devices
Q6.A user in a remote rural location needs internet access. There is no cable, fiber, or DSL available, but there is a clear view of the southern sky. Which connection type is most appropriate, and what is its main drawback?
Explanation: Satellite internet works anywhere with a clear view of the sky, making it the option for locations with no wired service. Its main drawback is high latency, because the signal must travel to a satellite in orbit and back, which hurts real-time applications such as video calls and gaming. Option C is wrong because cellular coverage is not stated to be available here, and its drawback is data caps and coverage rather than low bandwidth. Option D is wrong because a WISP needs a nearby provider tower, which is not mentioned. Option A is wrong because dial-up is obsolete and not listed among the exam's connection types.
Exam objective: 220-1201 Objective 2.7: Compare and contrast internet connection types, network types, and their characteristics
Q7.A technician has run a new Ethernet cable through a wall but does not know which port it terminates on at the patch panel. Which tool should be used to identify the correct port?
Explanation: A toner probe (tone generator and probe) sends an audible tone down the cable so the technician can find which patch panel port it terminates on by listening for the tone. Option C is wrong because a crimper attaches connectors to cable ends; it cannot trace a run. Option B is wrong because a loopback plug tests whether a port can send and receive; it does not identify which cable is which. Option A is wrong because a cable stripper only removes the outer jacket from a cable.
Exam objective: 220-1201 Objective 2.8: Explain networking tools and their purposes
Q8.A company's website is hosted on three identical servers. Which device should be placed in front of them so that incoming visitor traffic is spread evenly across all three?
Explanation: A load balancer distributes incoming traffic across multiple servers so no single server is overwhelmed and the service stays available if one server fails. Option A is wrong because a spam gateway filters email. Option D is wrong because a proxy server forwards client requests and can cache content, but its purpose is not distributing load across servers (although some proxies can do this, the load balancer is the device designed for it). Option C is wrong because a patch panel is a passive cable termination point with no traffic-handling function.
Exam objective: 220-1201 Objective 2.3: Summarize services provided by networked hosts